IR Series Infrared Radiant Heaters
TOP > Products > IR Series
Use infrared to irradiate the sample, enabling non-contact, high-temperature heating.
Can be used for simple temperature rise testing in the atmosphere.
Heat samples in the atmosphere
Rapid heating, non-contact heating
Compact, low-cost units
Can be mounted in various testers.
A large number of options are available for research applications, such as a support stand and sample holder.
Heating materials such as oxides and ceramics in the atmosphere
Rolling
Heating samples for tensile testers and friction testers
Heat resistance testers
Heating for brazing
The IR Series grouping is shown below
IR Series infrared radiant heaters Products combining the units below
Infrared generator Convergent irradiation models IR198UT/IR298UT Converge infrared radiation into a small surface area to enable high-temperature heating.
Surface irradiation mode IR29PUT Uses infrared to irradiate and heat a 2 inch surface.
Auxiliary converging mirror Can be connected to the infrared generator to increase the maximum attainable temperature.
Support stand A special stand for the infrared generator.
 
Model name IR198 IR298
Infrared lamp rating 1kW 2kW
Maximum attainable temperature 1300°C 1500°C
Heated surface area φ10mm φ20mm
Cooling water flow rate 1L/min 2L/min


Each of these models is a set consisting of an infrared generator (IR198UT or IR298UT), auxiliary condensing mirror (SM98-40W), and support stand (ST1).
Model name IR198UT IR298UT IR29P
Infrared lamp rating 1kW 2kW
Maximum attainable temperature 1000°C 1300°C 800°C
Maximum attainable temperature with auxiliary converging mirror mounted 1300°C 1500°C
Heated surface area φ10mm φ20mm φ50mm
Maximum heating rate 100°C/sec 100°C/sec 50°C/sec
Cooling water flow rate 1L/min 2L/min
IR198UT IR298UT IR29P
Model name SM98-40W